Stemedu ESP32-S3 ESP32-S3-DevKitC-1 N8R8 Development Board based on ESP32-S3-WROOM-1 module, 8 MB Quad flash and 8 MB Octal PSRAM, SPI Interface WiFi +Bluetooth 2 in 1 Microcontroller for Ar-duino IDE

Stemedu ESP32-S3 ESP32-S3-DevKitC-1 N8R8 Development Board based on ESP32-S3-WROOM-1 module, 8 MB Quad flash and 8 MB Octal PSRAM, SPI Interface WiFi +Bluetooth 2 in 1 Microcontroller for Ar-duino IDE

Bán tại: Mỹ

4.1

Nhận ưu đãi lên đến 6% khi tham gia Fado VIPClub Giảm 1% trên đơn hàng (tối đa 200,000đ) khi thanh toán bằng FadoPay Đổi trả sản phẩm 24 giờ - Chi tiết

Giá về Việt Nam đã bao gồm các loại thuế phí, không phát sinh phụ phí

Nhập khẩu tiêu dùng

Nhập khẩu thương mại

1,020,975đ | GIẢM 49%

622,539đ

Sản phẩm có thể phát sinh phụ phí vận chuyển

Dự kiến giao hàng từ Mỹ về Việt Nam ngày 26-12-2025 - 01-01-2026

*Chiết khấu trực tiếp hấp dẫn cho Platinum và Super VIP. Nâng cấp ngay

Giá bạn thấy bằng giá bạn trả

Yên tâm mua sắm, giải tỏa rủi ro

Hàng chất lượng, rõ nguồn gốc

Sản phẩm nhập khẩu chính ngạch

Liên tục cập nhật hành trình

Miễn phí giao hàng trong nước

Cam kết giá bán niêm yết chính xác trên website

Bảo vệ quyền lợi Khách Hàng, hỗ trợ đổi trả nhanh chóng

Chất lượng đảm bảo, nguồn gốc rõ ràng, có đánh giá từ người mua và thẩm định độ uy tín người bán

An toàn, minh bạch hợp pháp, không sợ rủi ro

Theo dõi và cập nhật quá trình vận đơn thường xuyên

Miễn phí giao hàng trong nước, áp dụng cho đơn hàng từ 1,5 triệu

Thương hiệu STEMEDU là cái tên nổi tiếng được rất nhiều khách hàng trên thế giới chọn lựa. Sản phẩm STEMEDU ESP32-S3 ESP32-S3-DEVKITC-1 N8R8 DEVELOPMENT BOARD BASED ON ESP32-S3-WROOM-1 MODULE, 8 MB QUAD FLASH AND 8 MB OCTAL PSRAM, SPI INTERFACE WIFI +BLUETOOTH 2 IN 1 MICROCONTROLLER FOR AR-DUINO IDE là sự lựa chọn hoàn hảo nếu bạn đang tìm mua một món cho riêng mình.

Thông tin chi tiết

RAM	PSRAM
Operating System	Real-Time Operating System (RTOS)
CPU Manufacturer	Espressif
Wireless Communication Standard	Bluetooth, 802.11b
RAM Memory Technology	PSRAM
Total USB Ports	2
Item Weight	3.52 ounces
Package Dimensions	6.34 x 4.02 x 0.98 inches
Processor Brand	Espressif
Manufacturer	ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD
ASIN	B09VBFMTDS
Date First Available	April 17, 2022

Tính năng sản phẩm

Sản phẩm Stemedu ESP32-S3 ESP32-S3-DevKitC-1 N8R8 Development Board based on ESP32-S3-WROOM-1 module, 8 MB Quad flash and 8 MB Octal PSRAM, SPI Interface WiFi +Bluetooth 2 in 1 Microcontroller for Ar-duino IDE của thương hiệu Stemedu với nhiều tính năng nổi bậc, là một sản phẩm được nhiều khách hàng trên thế giới lựa chọn.

Product description

ESP32-S3 ESP32-S3-DevKitC-1 N8R8 Development Board

ESP32-S3-DevKitC-1-N8R8 ESP32-S3-WROOM-1 8MB Flash 8MB PSRAM

Description:

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions.

This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 8 MB PSRAM.

Please note: The S3 is similar to the ESP32-S2 - but adds a dual core and Bluetooth LE (not classic!) However, there is minimal support for this dev board. For example, as of the time of this writing, there is no Arduino or CircuitPython support - only ESP IDF! Please purchase if you're doing development with the S3, and OK with stuff not working 100% out of the box.

Applications 1:

Home Automation
Smart Building
Industrial Automation
Smart Agriculture
Audio Applications
Health Care Applications
Wi-Fi-enabled Toys
Wearable Electronics
Retail & Catering Applications

Applications 2:

Generic Low-power IoT Sensor Hub
Generic Low-power IoT Data Loggers
Cameras for Video Streaming
Over-the-top (OTT) Devices
USB Devices
Speech Recognition
Image Recognition
Mesh Network

ESP32-S3-DevKitC-1-N8R8 ESP32-S3-WROOM-1 8MB Flash 8MB PSRAM

Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC-1 on a breadboard. We particularly like that there's a debug UART/USB port and a separate native USB port, so you can upload/debug/USB all at once.

There are three mutually exclusive ways to provide power to the board:

USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
5V and G (GND) pins
3v3 and G (GND) pins

Components:

ESP32-S3-WROOM-1: ESP32-S3-WROOM-1 is a powerful, generic Wi-Fi + Bluetooth LE MCU module that has a rich set of peripherals. It provides acceleration for neural network computing and signal processing workloads. ESP32-S3-WROOM-1 comes with a PCB antenna.
5V to 3.3V LDO: Power regulator that converts a 5V supply into a 3.3V output.
Pin Headers: All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing and programming.
USB-to-UART Port: A Micro-USB port used for power supply to the board, for flashing applications to the chip, as well as for communication with the chip via the on-board USB-to-UART bridge.
Native ESP32-S3 USB Port: ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.
Boot Button: Download button. Holding down Boot and then pressing Reset initiates Firmware Download mode for downloading firmware through the serial port.
Reset Button
USB-to-UART Bridge: Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
RGB LED: Addressable RGB LED, driven by GPIO48.
3.3V Power On LED: Turns on when the USB power is connected to the board.

The PSARM can work, this board can work on ESP-IDF 4.4 and Arduino.

Here is the link

https(:)//github(dot)com/espressif/arduino-esp32
Any question please con tact via sales@espressif(dot)com

There are the document links

https(:)//docs(dot)espressif(dot)com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1(dot)html
https(:)//www(dot)adafruit(dot)com/product/5336

Please download this file on this page


	See more information	See more information	See more information	See more information	See more information	See more information

Customer Reviews	7	—	25	21	19	22
Product	Stemedu ESP32-PICO-KIT V4.1 ESP32 Development Board WiFi + Bluetooth Dual-Mode Microcontroller Module Integrated with 40 MHz 4 MB flash RF Filter Capacitors for Ar duino	Stemedu ESP32-S2 Development Board ESP32-S2-Saola-1 Microcontroller Processor ESP32-S2-WROVER Wi-Fi MCU Module with 4 MB Flash and 2 MB PSRAM for Ar dunio IDE	Stemedu 2 Sets LoRa32u4ii Lora Development Board Module, JST-PH2.0mm-2P Connector, IPEX Antenna, ATmega32u4 SX1276 HPD13A 915MHz 868MHz, for Arduino UNO Mega 2560 Nano	42PCS Solderless Double-Sided Protoboard Universal PCB Board Prototype Kit Electronic Breadboard with 6 Sizes (2x8 3x7 4x6 5x7 6x8 7x9cm) for Arduino DIY Project	600PCS/LOT 1/4W Metal Film Resistor Assortment Kit, 1% Resistors Assorted Set, 10 Ohm-1M Ohm Resistance Pack for DIY Electric Projects, 30 Values Each 20pcs	240pcs Multicolored Dupont Cable 20cm 10cm Breadboard Prototyping Wires 40pin M-M, 40pin M-F, 40pin F-F Jumper Wire Kit for Arduino DIY Project (8" and 4")
Module	/	ESP32-S2-WROVER	HPD13
WiFi	✓	✓
Bluetooth	✓	✓
Flash	4MB	4MB
PSRAM		2MB
USB interface	Micro USB	Micro USB	Micro USB


	See more information	See more information	See more information	See more information	See more information	See more information

Customer Reviews	2	18	13	66	93	37
Name	150Pcs RM065 Adjustable Resistor Kit 15 Values 100 ohm - 1M ohm Multiturn Trimmer Potentiometer Assortment Set with Plastic Box	5PCS LM393 Sound Sensor Module - High Sensitivity Microphone Sound Detection Sensor with 3.3-5V Digital Onboard Potentiometer Led Indicator for Arduino	5PCS Capacitive Analog Soil Moisture Sensor Module 3.3~5.5V Corrosion Resistant Humidity Detection Sensors DIY Electronic for Arduino for Raspberry Pi	5PCS GY-521 6 DOF mpu6050 Accelerometer Sensor Module MPU-6050 3 Axis Gyroscope 3 Axis Acceleration 16 Bit IIC I2C Breakout Board for Arduino	5PCS ESP8266 ESP-01S Adapter WiFi Module Wireless Serial Transceiver with 4MB Flash DIP-8 3.3V for Arduino	5PCS 8-Digit 7 Segment MAX7219 Digital Segment Module, Seven Section 8 Bit LED Display Tube for Ar-duino MCU/51/AVR/STM32 for Raspberry Pi ESP8266 Nodemcu

Mô tả

Thông tin chi tiết sản phẩm:

ESP32-S3 Development Kits offer the ESP32-S3-DevKitC-1 entry-level development board equipped with either ESP32-S3-WROOM- 1 or ESP32-S3-WROOM-1U, a general-purpose Wi-Fi + BLUETOOTH LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 8 MB PSRAM.
Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC-1 on a breadboard.
ESP32-S3 has 45 programmable GPIOs and common peripheral interfaces such as SPI, I2S, I2C, PWM, RMT, ADC, UART, SD/MMC host controller and TWAITM controller.
Tutorial link: https(:)//docs.espressif(Dot)com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1(Dot)html
You will get: 1 x ESP32-S3-DevKitC-1-N8R8 ESP32-S3-WROOM-1 8MB flash 8MB PSRAM development board.

Xem thêm