| Processor | Tegra |
| CPU Manufacturer | NVIDIA |
| Wireless Communication Standard | Infrared |
| Compatible Devices | Arduino UNO R3, Arduino IDE compatible devices |
| Processor Count | 1 |
| Product Dimensions | 9.1"L x 6.4"W x 2.55"H |
| UPC | 747100058301 |
| Item model number | s29 |
| Item Weight | 1.59 pounds |
| Item Dimensions LxWxH | 9.1 x 6.4 x 2.55 inches |
| Color | Super Starter Kit |
| Processor Brand | NVIDIA |
| Computer Memory Type | DRAM |
| Batteries | 1 CR2 batteries required. (included) |
| Manufacturer | RexQualis |
| ASIN | B074WMHLQ4 |
| Is Discontinued By Manufacturer | No |
| Date First Available | August 17, 2017 |
REXQualis controller board is based on Arduino UNO R3,100% compatible with Arduino IDE, and come with clearly print on the female header connector more precise and easier to use the wire.
Pins and wires on some of the parts like LCD16502 and Motors have been pre-soldered which is very convenient and saves your time.
We upgraded and optimized some modules. Added Diodes to prevent the positive and negative electrodes from inserting faults and burn the motherboard. Added Indicator Light, we can clearly identify whether the module is work or not.
REXQualis Super Starter kits come with a 9V 1A Power Adapter to replace a 9V Battery which is existing security threat.
In this project , you will learn how to connect LCD Display to microcontroller board and display what we type. In addition, with the Potentiometer we can control the brightness of the screen.
LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.
REXQualis LCD1602 Module come with pin header, not need to be soldered by yourself.Then you can easy to Lining up the display with the top of the breadboard helps to identify its pins.
In this project, you will learn a fun and easy way to control a stepper motor from a distance using an IR remote control.
The 28BYJ-48 is a small 5 volt geared stepping motors which are apparently widely used to control things like automated blinds, A/C units. And it come with a ULN2003 stepper motor driver board, allows you to easily control the 28BYJ-48 stepper motor from a microcontroller.
The IR sensor is connected to the microcontroller board directly since it uses almost no power.When you are fully connected, you can control the stepping motor through IR remote.
In this project you will learn how to control a small DC motor by microcontroller board with using a L293D transistor and Relay.
L293D transistor is a very practical chip that can independently control two DC motors. In this experiment, just half of the chip is used. Since most pins on the right side of the chip are used to control the second motor, they will not be used here.
Relays are generally used to switch smaller currents in a control circuit and do not usually control power consuming devices except for small motors and Solenoids that draw low amps. Nonetheless, relays can "control" larger voltages and amperes by having an amplifying effect because a small voltage applied to a relays coil can result in a large voltage being switched by the contacts.
