PGFUN DIY CNC Touch Probe XYZ Axis 3D Digitizing Edge Finder 3-Coordinate Measuring Sensor Kit with 6 mm Shank & 2.0 mm Tungsten Steel Ball Tip

Thương hiệu: PGFUN

PGFUN DIY CNC Touch Probe XYZ Axis 3D Digitizing Edge Finder 3-Coordinate Measuring Sensor Kit with 6 mm Shank & 2.0 mm Tungsten Steel Ball Tip

Bán tại: Mỹ

4.6

Nhận ưu đãi lên đến 6% khi tham gia Fado VIPClub Giảm 1% trên đơn hàng (tối đa 200,000đ) khi thanh toán bằng FadoPay Đổi trả sản phẩm 24 giờ - Chi tiết

Giá về Việt Nam đã bao gồm các loại thuế phí, không phát sinh phụ phí

Nhập khẩu tiêu dùng

Nhập khẩu thương mại

2,798,608đ

Sản phẩm có thể phát sinh phụ phí vận chuyển

Style

NPN-NO

NPN-NC

Dự kiến giao hàng từ Mỹ về Việt Nam ngày 20-12-2025 - 26-12-2025

*Chiết khấu trực tiếp hấp dẫn cho Platinum và Super VIP. Nâng cấp ngay

Giá bạn thấy bằng giá bạn trả

Yên tâm mua sắm, giải tỏa rủi ro

Hàng chất lượng, rõ nguồn gốc

Sản phẩm nhập khẩu chính ngạch

Liên tục cập nhật hành trình

Miễn phí giao hàng trong nước

Cam kết giá bán niêm yết chính xác trên website

Bảo vệ quyền lợi Khách Hàng, hỗ trợ đổi trả nhanh chóng

Chất lượng đảm bảo, nguồn gốc rõ ràng, có đánh giá từ người mua và thẩm định độ uy tín người bán

An toàn, minh bạch hợp pháp, không sợ rủi ro

Theo dõi và cập nhật quá trình vận đơn thường xuyên

Miễn phí giao hàng trong nước, áp dụng cho đơn hàng từ 1,5 triệu

Thương hiệu PGFUN là cái tên nổi tiếng được rất nhiều khách hàng trên thế giới chọn lựa. Sản phẩm PGFUN DIY CNC TOUCH PROBE XYZ AXIS 3D DIGITIZING EDGE FINDER 3-COORDINATE MEASURING SENSOR KIT WITH 6 MM SHANK & 2.0 MM TUNGSTEN STEEL BALL TIP là sự lựa chọn hoàn hảo nếu bạn đang tìm mua một món cho riêng mình.

Thông tin chi tiết

Customer Reviews

4.6 out of 5 stars 45Reviews

Tính năng sản phẩm

Sản phẩm PGFUN DIY CNC Touch Probe XYZ Axis 3D Digitizing Edge Finder 3-Coordinate Measuring Sensor Kit with 6 mm Shank & 2.0 mm Tungsten Steel Ball Tip của thương hiệu PGFUN với nhiều tính năng nổi bậc, là một sản phẩm được nhiều khách hàng trên thế giới lựa chọn.

Product description

PGFUN CNC 3D Touch Probe Upgraded XYZ Axis Anti-roll Edge Finder

Tips

The touch probe is developed for DIY applications, not recommended for industrial machining center
You may need to use software and corresponding scripts to achieve all the functions

Features:

measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners,
fast zero-point acquisitions
surface flatness acquisition
workpiece scanning & digitizing

inner

Same Surface, Different Inside

PGFUN added the silicone o-ring seals for waterproofing and the probe uses high-quality electronics for true high measurement precision and high repeatability.

Upgraded Digitizing CNC Touch Probe

The shell is made of the fine frosted black oxidized aluminum alloy, which makes it looks better and last longer than others, besides, this tool can be converted to a tool setter by a tool setter base and flat tip.

One-stop Market

PGFUN provides the spare parts and the related parts/tools of the touch probe, so you do not need to worry about the touch probe being unusable due to damaged parts.

Application

Theoretically it can work with MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept probe input.

For Mach3 and GRBL

Probe Wizard or ProbeIt are recommended for Mach3
GRBLGRU is recommended for GRBL

For Other Control Systems

contact your software, and controller manufacturer or lookup forums for probe wiring and connections.

IO Signal Output

NPN-NO: High-level signal output when powered, and turns to Low-level signal output when Triggered
NPN-NC: Low-level signal output when powered, and turns to High-level signal output when Triggered

Q & A (keep updating...)

Q1: Why the accuracy not as advertised?

A1: the accuracy is true, to reach high accuracy, please ensure everything is prepared, like adjusting the concentricity, and the parts/ tools that may affect the accuracy are more sensitive than the touch probe.

Q2: Does this touch probe work for the non-conductive material like acrylic?

A2: This is a mechanical probe, it identifies and transmits the signal by physical contact, do not worry about the conductivity of the material.

Q3: why i can not measure the probe height by tool setter?

A3: when it works with other tools, like tool setter, please ensure the sensitivity of the tool setter is higher than this edge finder (trigger force less than 1.6 N).

Latest Update

Q4: Can the concentricity be adjusted?

A4: yes, there are 4 silver set screws on the sides for concentricity adjustment.

Note 1: Use the 0.001" Dial Indicator Adjusting the Concentricity (Not the 0.0001" Dial Indicator)

Note 2: Let the Dial Indicator Point to the Ball Styuls of the Touch Probe, Not the Body of the Touch Probe.

Q5: Why the probe tip isn’t perfectly straight with the body?

A5: it may be caused due to violent shipping or over-triggering, you can correct it by adjusting the concentricity by the set screws. if the tip was bent, you need to replace the tip and then adjust the concentricity.

Tips

2 versions (NPN-NO & NPN-NC) of touch probe are available to choose
The 3 pcs quick connector pack was equipped for wiring convenient
Watch Out for the 4th Q&A on the Left/ Top to Properly Adjust the Concentricity.

	NPN-NO Probe	NPN-NC Probe	Tool Setter Kit	Original Tip	Tip Adapter	Extension Tip

Customer Reviews	4	45	16	16	16	16
Price	$99.99	$76.99	$30.99	$14.99	— no data	$14.99
Description	8 mm Shank & Ruby Ball Tip	6 mm Shank & Tungsten Steel Tip	Stainless Steel Base & Ceramics Tip	Original Tungsten Steel Tip	POM Adapter & Gold-plated Rods	Extension Tungsten Steel Tip
Notes	no data	no data	Only for Touch Probe with 6 mm Shank	Only for Touch Probe with 6 mm Shank	Only for Touch Probe with 6 mm Shank	Only for Touch Probe with 6 mm Shank

Mô tả

Thông tin chi tiết sản phẩm:

This 3-coordinate XYZ axis CNC probe is designed for wide DIY CNC applications, like fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing. ( Tips: It's developed for DIY applications, not recommended for industrial use.)
Main Specs: power: DC5-24V, NPN-NO wiring ( High-level IO signal output when powered and turns to Low-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feed rate: 50-200 mm/min, over travel protection distance: XY- ±4mm/0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 1.6 N. (Note: if working with a tool setter to test the height of the probe, please ensure the sensitivity of the tool setter is better/ trigger force less than 1.6 N.)
Application: theoretically it can work with GRBL, MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept 3-port probe input (contact your software, and controller manufacturer or lookup forums for probe wiring and connections).
Upgraded Digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it look great and protects the touch probe well from dropping. Besides, this tool can be modified to a tool setter by a tool setter base and flat tip.
Package Includes: 3D touch probe x 1, cable x 2 m/ 6.5ft, allen wrench x 1, tungsten steel ball tip x 1, wire connector kit x 1 (to solve the lack of control board wiring ports and extend the wire ).

Xem thêm