| Manufacturer | Rasbee |
| Part number | N1866427 |
| Material | AD-9833 1 Piece |
RASBEE AD9833 Waveform Signal Generator DDS Module Programmable Serial Interface Module Sine Wave/Triangle Wave/Square Wave Signal Generation Board GY-9833 Microprocessor AD9833WBRMZ
AD9833 is a low-power programmable waveform generator signal generator. Sine Wave/Triangle Wave/Square Wave.
AD9833 is a programmable waveform generator that can generate sine waves, triangular, and square-wave signals from 0 to 12.5 M.H.z.
The output frequency and phase are programmable software and can be easily adjusted. No external parts required.
Frequency register is 28 bit wide. Clock frequency is 25 M.H.z. It can achieve the resolution of 0.1 H.z.
AD9833 is clocked at 1M.H.z and can be adjusted to a resolution of 0.004H.z.
AD9833 is written through the serial interface line. The serial interface operates at clock frequencies up to 40 M.H.z. Standard compatible with DSP and microcontrollers.
Device operates with 2.3V-5.5V power supply
AD9833 has Power Down (SLEEP).
This will shut off unused parts of the device and minimize power consumption.
For example, the DAC can be turned off during output clock generation
Linear loss, linear attenuation, testing equipment, scanning clock generator Frequency excitement / waveform generation. Fluid and gas flow measurement
Digitally programmable frequencies and phases
Sine Wave/Triangle Wave/Square Wave Output
12.65mW power consumption at 3V
Material: Plastic + electronic components
Size: Approx. 0.7 x 0.5 inches (18 x 12
Output frequency range: 0 M.H.z-12.5 M.H.z
28-bit resolution: 0.1 H.z with 25 M.H.z standard clock
Power supply voltage: 2.3V - 5.5V
No external parts required
3-Wire SPI Interface
Extended temperature range: -40 °C to +105 °C
Update frequency: 25 (max)
Maximum VOUT value: 0.65 V
Minimum VOUT value: 38 mV
VOUT Temperature Coefficient: 200°
Input high voltage: 1.7V - 2.8V
Input Low Voltage: 0.5V-0.7V
Input Current: 10 μA
Input Capacity: 3 pF
Operating temperature range: -40 °C to +105 °C, standard specifications at 78 °F (-40 °C to +105 °C), 78 °F (25 °C).
