| Brand | OSOYOO |
| Manufacturer | OSOYOO |
| Package Dimensions | 18.8 x 14.4 x 5 cm; 375 g |
| Item model number | 2MB Quad-SPI |
| Processor Brand | Raspberry Pi財団 |
| Processor Speed | 133 MHz |
| Processor Count | 1 |
| RAM Size | 256 KB |
| Hard Drive Size | 2 MB |
| Voltage | 5 Volts |
| Power Source | DC |
| Hardware Platform | RP2040 |
| Are Batteries Included | No |
| Item Weight | 375 g |
Ultra small board with microcomputer RP2040 developed by Raspberry Pi Foundation.
The Pico is a simple microcomputer board with a microcomputer RP2040 (Arm Cortex-M0+ Dual Core @ 133MHz) that is equipped with 2MB high-speed Flash memory and a power IC that supports 1.8-5V input. Ultra small (about half the micro:bit) but still allows full access to the RP2040 microphone without compromising flexibility.Designed with consideration for learning and hobby, as well as for incorporating applications. Pico can run programs made by Python (MicroPython) or C/C++Just copy the dedicated binary files from the USB Flash to your Pico and write the software.
OSOYOO Raspberry Pi Pico Python Programming Kit is an electronic crafting kit with 15 items for Raspberry Pi Pico, 13 learning lessons (MicroPython Thonny 7, Arduino IDE (C/C++), 5 visual programming), and one stop online manual.
Online Manual: bit.ly/3BDHzYj
This kit includes all the modules commonly used in electronic projects such as RFID Tag Reader Writer, LED Diode, Servo, Variable Resistor, 1602 LCD Display, Breadboard, Resistance and Buzzer, PIR Sensor.
Dual-core ARM Cortex M0+ processor with RP2040 microcontroller designed with Raspberry Pi (UK) and maximum operating frequency 133 MHzSRAM: 264KB, Flash memory: 2 MB end through hole for direct soldering to the carrier board; USB 1.1 Compatible with both host/device Low power sleep mode and Dorman mode available via USB. Programmed by & Drop Writable 26 x Multi-function GPIO pins 2 x SPI, 2 x I2C, 2 x UART, 3 x 12 bit ADC, 16 x PWM channels, Equipped with precise clocks and timers, Built-in temperature sensor, fast floating decimal point library, 8 x programmable I/O (PIO)
USB cable included
GPIO pin headers are soldered.
[Note]
No SD card slot for storage.
Linux OS cannot be installed.
In this project, you can use the push button to control the LED diodes on or off.
You can read the digital signal from the Pico digital pin and send 0/1 data to the Pico digital pin.
The 1602 I2C LCD is a display with LED backlight that can display up to 16 characters on each line.This lesson will show you how to send temperature information from Pico to I2C LCD.
I2C (I Square Sea) is a cereal bus developed by Philips.It is used for connecting low-speed peripherals to motherboards, built-in systems, mobile phones, etc.
An abbreviation for Inter-Integrated Circuit and I-squared-C (I Square Sea) has been formally readed.However, because the letters cannot be used on plain text in a generic letter code environment, they are often described as I2C or IIC, and they may be called "I to Sea" or katakana.
Using PIR motion sensor to detect human movement.When an intruder motion is detected, the Pico will activate the buzzer alarm. This is a typical application used in many home security systems.
Create a security access control system using RFID reader writer module, learn RFID communication protocol SPI and transmit data to Pico.
PDF files, demo videos, and basic lesson tutorials are provided by step by step using sample codes, circular graphs and videos.All of the lessons are tested and ensured to work properly.Use your educational materials with confidence. The python sample code is also provided with detailed instructions.You can use it to help you understand code or customize your application.Learning lessons 13, MicroPython (Thonny) 7, Arduino IDE (C/C++), 5 Visual Programming (Pipper), Pico-related Electronic Craft Knowledge and Sample Code are accessible and easy and convenient in one place.One stop learning site is link: bit.ly/3BDHzYj
